Misted Double-Glazed Units
Replacement for units showing condensation, haze or moisture between panes due to seal failure.

Condensation, cloudiness or moisture trapped between double-glazed panes usually means the sealed unit has failed. M25 Glazing measures and replaces failed glass units while retaining suitable existing frames.
If the moisture is inside the cavity between the panes, wiping the room-side glass will not remove it. The practical repair is normally a new made-to-measure insulated glass unit fitted into the existing frame, provided the frame itself remains suitable.
Replacement for units showing condensation, haze or moisture between panes due to seal failure.
Made-to-measure replacement for cracked or damaged double-glazed glass where the frame can be retained.
Assessment of the unit, spacer, thickness and glass specification before a replacement is manufactured.
Double glazing is an insulated sealed unit made from two panes separated by a spacer. When the edge seal fails, moisture can enter the cavity and create misting, condensation or permanent-looking marks between the panes. The frame can still be sound even though the glass unit has failed.
The appearance may change with temperature and weather, but moisture between the panes is different from ordinary room-side condensation.
A failed unit does not automatically mean the whole window needs replacement. Where the surrounding uPVC, timber or aluminium frame remains serviceable, we can measure the insulated glass unit and replace that component only.
The new unit needs to match the actual opening, overall thickness, spacer and any safety, privacy or decorative glass requirements. Final manufacturing sizes are taken accurately rather than estimated from a photograph.
We cover misted and failed sealed-unit enquiries across London, including London areas such as Barnet, Finchley, Camden, Hendon, Enfield and Haringey. The same measurement-led approach applies whether one unit has failed or several windows need replacement glass.
Accurate replacement depends on more than width and height. We consider the overall unit thickness, spacer width, glass build-up, safety requirements and any obscure or decorative finish. If a spacer or glass stamp is visible, a clear close-up can help with the initial assessment.
For multiple failed units, number the photographs or identify each room/opening so the survey and quotation remain clear.
Misting between panes is a sealed-unit problem. A window that will not close, lock or open correctly is a separate hardware issue, even if it also happens to be double glazed.
For handles, hinges, mechanisms and locks, use our window lock and hardware repair page. For broader frame and window faults, use window repairs. This page is the dedicated service for failed and misted glass units.
Send the full postcode, a straight-on photograph of the complete window, a close-up showing the misting and approximate visible glass dimensions if safe to take. If there are several failed units, send one clear photo per opening and label them.
When moisture is trapped between the panes, the sealed glass unit has normally failed. The usual repair is to replace the unit while retaining a serviceable existing frame.
Not necessarily. If the frame remains suitable, the failed double-glazed unit can often be replaced without replacing the complete window.
Misting generally occurs when the edge seal of the insulated glass unit fails and moisture enters the sealed cavity.
Yes. We cover misted sealed-unit replacement across London, including London areas.
The unit needs accurate width, height, overall thickness, spacer and glass-specification measurements before manufacture.
Yes. Cracked or damaged sealed units can be measured for replacement where the frame and glazing system remain suitable.
Call M25 Glazing on 020 8087 4781 or send a photo and postcode on WhatsApp. Tell us how many units are affected and whether the issue is misting, cracking or both.